Catalog Stanley Supply, Inc.
Cutting Blades
cutting-blades
Turbo blades offer a faster cut than segmented blades due to the serrated segment design, allowingless surface-to-surface contact.
For Use on High Speed and Masonry Saws
Great cutting value /Asset/74959.jpg
Turbo blades offer a faster cut than segmented blades due to the serrated segment design, allowingless surface-to-surface contact.
Good Quality & Cutting Life
For Use on High Speed and Masonry Saws /Asset/12480.jpg
Turbo blades offer a faster cut than segmented blades due to the serrated segment design, allowingless surface-to-surface contact.
For Use on High Speed and Masonry Saws /Asset/12281.jpg
Good Quality & life
/Asset/74950.jpg
Very Good quality & good life
/Asset/11344.jpg
Even Better quality & long life
/Asset/11242.jpg
For intermittent cuts without water for patch/repair work or expansion joints /Asset/11196.jpg
For use on high speed, masonry and low HP walk behind saws /Asset/08425.jpg
Carbide Rebar & Plate Cutters
Designed to cut through rebar or plate steel after a diamond core bit has drilled through the concrete. Carbide inserts are brazed into the core barrel. This specialized bit must be used with water to keep the bit cool while drilling in steel. /Asset/CarbideBit.jpg
Additional sizes available upon request. /Asset/66908.jpg
Additional sizes available upon request. /Asset/15894.jpg
High alumina, hard materials, fast cutting
Medium duty fire brick, fast cutting
General purpose, insulating brick, ladle brick
Long life for silicon carbide & other abrasive materials
1" arbor with drive pin hole is standard. Custom arbor sizes available upon request. When ordering, please specify arbor size. Available Sizes: 12", 14", 16", 18" & 20" /Asset/Refractory_Wet_Blades.jpg
Star Blue Turbo Blades (GOOD) 4"-14"
(15) High Quality Blades with Turbo Design for Fast CuttingTurbo blades offer a faster cut than segmented blades due to the serrated segment design, allowingless surface-to-surface contact.
For Use on High Speed and Masonry Saws
Great cutting value /Asset/74959.jpg
Standard Gold Turbo Blades (BETTER)4"-20"
(15) High Quality Blades with Turbo Design for Fast CuttingTurbo blades offer a faster cut than segmented blades due to the serrated segment design, allowingless surface-to-surface contact.
Good Quality & Cutting Life
For Use on High Speed and Masonry Saws /Asset/12480.jpg
Heavy Duty Orange Turbo Blades (BEST)4"-20"
(16) High Quality Blades with Turbo Design for Fast CuttingTurbo blades offer a faster cut than segmented blades due to the serrated segment design, allowingless surface-to-surface contact.
For Use on High Speed and Masonry Saws /Asset/12281.jpg
Star Blue Small Diameter Segmented Blades (GOOD)4"-9"
(7) Dry Cutting Blades for Electric Saws and Right Angle Grinders Standard Gold Small Diameter Segmented Blades (BETTER)(4"-9")
(16) Dry Cutting Blades for Electric Saws and Right Angle Grinders Heavy Duty Small Diameter Segmented Blades(BEST)4"-9"
(16) Dry Cutting Blades for Electric Saws and Right Angle Grinders Star Blue High Speed Diamond Blades (GOOD)10"-16"
(7)- Good cutting value
- General purpose cutting in hard materials
- Dry or wet cutting
- Diamond depth of 0.394"
- Segment height of 0.472"
- Specification:
- H8B - General Purpose
- H10B - Green concrete, asphalt, brick and block
- For use on high speed, masonry and low HP walk behind saws
- 1" arbor blades include 20mm heavy duty bushing
Standard Gold Masonry Blades (BETTER)10"-24"
(24) Dry & Wet Blades for Brick a Block Applications- Good quality and fast cutting - good life
- For use on masonry & block saws
Heavy Duty Orange Masonry Blades (BEST) 10"-24"
(24) Dry & Wet Blades for Brick a Block Applications- Better quality and fast cutting - long life
- For use on masonry & block saws
Star Blue Masonry Blades (GOOD) 12"-20"
(4) Dry & Wet Blades for Brick a Block Applications- Good quality and best cutting value
- For use on masonry & block saws
Standard Gold High Speed Diamond Blades (BETTER)12"-16"
(9)- Better quality & value
- Dry or wet cutting
- Diamond depth of 0.394"
- Segment height of 0.472"
- Specifications:
- H7S - Hard materials
- H8S - Concrete with some rebar - long life
- H10S - Green concrete, asphalt, brick & block
Heavy Duty Orange High Speed Diamond Blades (BEST)10"-20"
(24)- Very high quality diamond and longer life
- Dry or wet cutting
- Diamond depth of 0.295"
- Segment height of 0.394"
- Specifications:
- H7H - Reinforced concrete hard materials
- H8H - General purpose -longer life
- H10H - Green concrete, asphalt, brick & block - longer life
Heavy Duty Orange Dry Walk Behind Blades 12"-20"
(17) For saws 20 horsepower and below- Laser welded for dry cutting
- Wide gullets to keep the blade cool
- Longer blade life
For intermittent cuts without water for patch/repair work or expansion joints /Asset/11196.jpg
Demo-Cut Blades4 1/2"-20"
(9) Carbide-tipped for metals, roofing and building materials, wood, tar, fire doors, plastic and rubber. Not suitable for concrete.- For use ONLY on saws with retractable blade guards
- Made with 0.250" thick carbide chunks that allow extremely fast cutting that will not bind or load (an important factor in rescue cutting).
For use on high speed, masonry and low HP walk behind saws /Asset/08425.jpg
Stud-Cut Blade14"
- Electroplated diamond technology
- Fast cutting through thin gauge studs and plastics
- 100% diamond exposure doesn't require sharpening
- Segmented core to keep the blade cool while cutting
- Good quality diamonds for long life cutting
Carbide Rebar and Plate Cutters1/2"-6"
(38) Unique Core Bits for Specialized ApplicationsCarbide Rebar & Plate Cutters
Designed to cut through rebar or plate steel after a diamond core bit has drilled through the concrete. Carbide inserts are brazed into the core barrel. This specialized bit must be used with water to keep the bit cool while drilling in steel. /Asset/CarbideBit.jpg
A2Z Vacuum Bonded Blades41/2"-16"
(5)- Vacuum bonded technology - diamonds are adhered to the gullets
- Great for rescue and emergency situations
- Cuts a wide range of materials
- Holes in the 'segments' help with cooling while cutting metal and other heat generating materials
Ductile Iron Blades12"-14"
(2)- Ideal for cutting ductile iron and thin gauge metal drywall studs
- Turbo-style segment design
- Abrasive material adhered to the core to help prevent metal burrs
Joint Widening and Cleaning Blades 12"-14" 5/32-3/8 Wide
(8) Widen control joints in green concrete or old sealed joints in cured concrete. Used in pairs with spacers, which allow the desired joint width to be maintained by flipping the blades inside out as the side gauge wears on the outside edge. Spacers used between joint are made specifically for your machine and application. Available in: Heavy Duty Orange (H)Additional sizes available upon request. /Asset/66908.jpg
Random Crack Saw Blades5"-8" 1/4-1/2 Wide
(12) Random Crack Saw Blades are used to prepare random cracks for resealing with joint sealant material. Available in Heavy Duty Orange (H)Additional sizes available upon request. /Asset/15894.jpg
Wet Ring Saw Blades14"
(6) Offers a 10" cutting depth. Use for precutting or following chain cutting. Available with or without drive wheel. Custom wet bond specifications available. /Asset/90666.jpg Ninja Joint Cleaning Blades12"-14" 3/16-1/4 Wide
(6) Ninja Joint Cleaning Blades are used in pairs for fast, aggressive removal of sealants and compressibles in existing control joints while cutting joint face into smooth surface for resealing. /Asset/45957.jpg Refractory Wet Blades
(3) Long Lasting, Fast Cutting in a Wide Range of Refractory Materials Available in these high concentration quality grades: Heavy Duty Orange (H), Premium Black (P) & Supreme Silver (U)High alumina, hard materials, fast cutting
Medium duty fire brick, fast cutting
General purpose, insulating brick, ladle brick
Long life for silicon carbide & other abrasive materials
1" arbor with drive pin hole is standard. Custom arbor sizes available upon request. When ordering, please specify arbor size. Available Sizes: 12", 14", 16", 18" & 20" /Asset/Refractory_Wet_Blades.jpg
